diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
index 20cce76..6a80be5 100644
--- a/arch/arm/include/asm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -15,7 +15,6 @@
 #ifndef __ASM_ARM_BYTEORDER_H
 #define __ASM_ARM_BYTEORDER_H
 
-
 #include <asm/types.h>
 
 #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index 2141a45..4a9e26f 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -880,7 +880,6 @@
 #define RL_FINAL	6
 #endif
 
-
 /* Interleaving policies at EMIF level- between banks and Chip Selects */
 #define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING	0
 #define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING	3
@@ -913,7 +912,6 @@
  */
 #define READ_IDLE_INTERVAL_NORMAL	(50*1000)
 
-
 /*
  * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
  * be enough. This shoule be enough also in the case when voltage is changing
@@ -961,7 +959,6 @@
 #define REG_SR_TIM		0xF
 #define REG_PD_TIM		0xF
 
-
 /* EMIF_PWR_MGMT_CTRL register */
 #define EMIF_PWR_MGMT_CTRL (\
 	((REG_CS_TIM << EMIF_REG_CS_TIM_SHIFT) & EMIF_REG_CS_TIM_MASK)|\
diff --git a/arch/arm/include/asm/mach-imx/gpio.h b/arch/arm/include/asm/mach-imx/gpio.h
index 2576352..f7d751f 100644
--- a/arch/arm/include/asm/mach-imx/gpio.h
+++ b/arch/arm/include/asm/mach-imx/gpio.h
@@ -4,7 +4,6 @@
  * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
  */
 
-
 #ifndef __ASM_ARCH_IMX_GPIO_H
 #define __ASM_ARCH_IMX_GPIO_H
 
diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h b/arch/arm/include/asm/mach-imx/mxc_i2c.h
index e8b330f..cf694de 100644
--- a/arch/arm/include/asm/mach-imx/mxc_i2c.h
+++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h
@@ -91,7 +91,6 @@
 		}					\
 	};
 
-
 #define I2C_PADS_INFO(name)	\
 	(is_mx6dq() || is_mx6dqp()) ? &mx6q_##name : &mx6s_##name
 #endif
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 17fdfbc..9945eeb 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -814,7 +814,6 @@
 #define HS_DEVICE           0x2
 #define GP_DEVICE           0x3
 
-
 /*
  * SRAM scratch space entries
  */
diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
index 21b3344..bc2f9e7 100644
--- a/arch/arm/include/asm/opcodes.h
+++ b/arch/arm/include/asm/opcodes.h
@@ -15,7 +15,6 @@
 #define ARM_OPCODE_CONDTEST_PASS   1
 #define ARM_OPCODE_CONDTEST_UNCOND 2
 
-
 /*
  * Assembler opcode byteswap helpers.
  * These are only intended for use by this header: don't use them directly,
@@ -42,7 +41,6 @@
 #define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
 #define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
 
-
 /*
  * Opcode byteswap helpers
  *
@@ -94,7 +92,6 @@
 
 #endif /* ! __ASSEMBLY__ */
 
-
 #ifdef CONFIG_CPU_ENDIAN_BE8
 
 #define __opcode_to_mem_arm(x) ___opcode_swab32(x)
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index e0e2d7e..b8ca50a 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -75,7 +75,6 @@
     char commandline[COMMAND_LINE_SIZE];
 };
 
-
 /*
  * The new way of passing information: a list of tagged entries
  */